Cummins
The most common industrial genset in Florida, and the easiest to support.
20 kW to 2 MW is realistic in the Florida secondary market, with the most choice between 60 kW and 500 kW.
Cummins generators →Diesel generator brands
We are an independent broker, so we have no reason to push one badge over another. Here is where each of the major industrial diesel brands genuinely fits, and what to check before you buy one used.
Ask which brand suits youThe most common industrial genset in Florida, and the easiest to support.
20 kW to 2 MW is realistic in the Florida secondary market, with the most choice between 60 kW and 500 kW.
Cummins generators →Built heavy, priced accordingly, and supported everywhere.
Commonly 100 kW to 2 MW in the Florida market, with the deepest selection in the 300 kW to 800 kW band.
Caterpillar generators →The quiet favourite in the 20 kW to 300 kW range.
Most commonly 30 kW to 400 kW, which covers the majority of Florida farm and small commercial requirements.
John Deere generators →Standby specialists with well-integrated controls.
Typically 30 kW to 1 MW, with most Florida activity between 100 kW and 500 kW.
Kohler generators →Strong on standby and value, less suited to continuous duty.
Broad: from roughly 20 kW light commercial standby up to multi-megawatt industrial configurations.
Generac generators →Legacy iron that still earns its keep, with eyes open.
Commonly 75 kW to 750 kW, almost always in the used and surplus market rather than new.
Detroit Diesel generators →Before you shop by brand
The load. What actually has to run, its starting surge, and the voltage and phase at the site. This sets the size range, and it comes before brand. How generator sizing works.
The rating basis. Standby, prime, or continuous. The same physical machine carries different numbers for each, and paying for a standby rating you cannot use continuously is a costly mistake.
The emissions tier. If the generator will run as anything other than emergency standby, its EPA tier affects whether it can be permitted. Read about Tier 2, 3, and 4 Final.
Get a first estimate in a couple of minutes. Open the calculator →
What 20 kW, 100 kW, and 300 kW units typically carry. Compare sizes →
All 67 Florida counties, from Pensacola to Key West. See service area →
There is no single answer, and any dealer who gives you one is selling what they have. Cummins and Caterpillar dominate the mid and large industrial range with the best parts support. John Deere is often the value choice from 30 kW to 300 kW. Kohler integrates standby systems well. Generac is strong on value and light commercial standby. What matters more than the badge is the condition and rating of the specific unit.
No. A correctly sized generator from a second-choice brand will serve you far better than an undersized or oversized unit from your first choice. Get the load right first, then choose among the brands available at that size.
No. GTG Power is an independent equipment broker and is not affiliated with any manufacturer. That is why we can tell you when a different brand is the better buy, and it is why we use brand names only to describe the equipment we source. We also supply new generators built to order, which are listed by size rather than by badge.
Often, yes. Tell us the make, model, kW, voltage, and phase you are after, along with your timing and budget. If that exact unit is not sensibly available we will tell you what is, and what the tradeoff is.
Generator sales and delivery in Florida